Support | ATP-600 Pro
On this page you’ll find all the instructions and information you need for printing labels with the ATP-600 Pro. Select the item for which you need support below.
Instruction videos
How to place labels
How to place ink ribbon
Cleaning your ATP-600 Pro
FAQ
The Altec Cloud Connector tool links your printers to the Barcode Portal and makes sure the labels are always printed with the right settings for an optimal print result. To prepare your printer for the Barcode Portal, please follow the steps of the Altec Cloud Connector installation.
After generating the labels, the label settings section will be displayed. Please make sure the correct settings are chosen from the dropdown menus before pressing the “Print labels” button.
Printer:
Select your ATP-600 Pro printer
Printer type:
Select 600 dpi for the ATP-600 Pro
Label type:
Select the label that is loaded in the printer
After generating the labels, the label settings section will be displayed. Please make sure the correct settings are chosen from the dropdown menus before pressing the “Print labels” button.
Printer:
Select your ATP-600 Pro printer
Printer type:
Select 600 dpi for the ATP-600 Pro
Label type:
Select the label that is loaded in the printer
The ASML logo should be pre-loaded on every Altec ATP-600 Pro printer. If this is not the case download the 600 dpi logo and TPM tool above and follow the steps below.
- Run the TPM tool.
- Select the printer(s) from the list
If the printer is not visible in the list, try to set up a connection with a USB cable - Go to File Manager
- In the File Type dropdown menu, select BMP
- Click Browse
- Browse to the ASML logo on your local drive
- Click Download
- To check if the download was successful, click Get. The file should now be visible in the box on the left.
- Close the pop-up, and then close the TPM tool.
- Test your printer.
